Company Location Information
Analog Devices Incorporated (CAGE Code:24355)
Assembled Products Division, 1 Analog Way, Wilmington, MA, 01887-2356, US
Company Contact: Mr. Harrison Betz,Phone: (360) 954-4761,Fax:
Land and Maritime Contact:Phone: 445-737-2725, Fax: 614-693-1658, E-mail: vqh.sp@dla.mil
Quality Management (QM) Program:TRB
Periodic Inspection System:Option 1
ISO 9000 System:
Technologies:Buffer,Data Acquisition Systems,DC/DC Converters,Op-Amp,Track and Hold,Voltage Reference,Signal Processor,AD/DA Converters
Sub: Spectrum Control Ltd. (CAGE: U4388)
Classes:
Class H, Class E
Qualification Letters:
VQ(VQH-04-007022),VQ(VQH-06-010144),VQ(VQH-04-006510),VQ(VQH-04-007023),VQ(VQH-05-008727),VQ(VQH-09-017847)
Substrate Fabrication Flows:
N/A
Substrate Fabrication:
Thick Film, 4 Conductor Level(s); Purchased Ceramic Co-fire
Assembly Flows:
FCES 6301:15
Substrate Attach:
Nonconductive Epoxy
Element Attach:
Nonconductive Epoxy,Conductive Epoxy
Add-on Elements:
Ceramic Tabs,Unpackaged Die,Chip Capacitors,Chip Resistors,Transformers
Wire Bonding:
Gold
Packages:
Ceramic Package, Quad Flat Pack, Seam Weld, 3.48 Seal Perimeter, 68 Leads, Gold Lead Finish; Ceramic Package, Dual-in-line, Seam Weld, 5.38 Seal Perimeter, 32 Leads, Gold Lead Finish; Ceramic Co-fire Package, Dual-in-line, Seam Weld, 2.53 Seal Perimeter, 24 Leads, Gold Lead Finish
Notes:
1/ The QML listing can be expanded provided appropriate qualification testing is
performed and passed. Therefore the manufacturer may accept an order for compliant
product not covered by his QML listing, but shall not ship the compliant product
until the testing has been successfully completed.
2/ Package seal perimeter is listed by largest perimeter successfully tested in
inches.
3/ Package lead counts are listed by maximum number of leads covered by qualification.
6/ Class E devices are devices, which meet all of the requirements of one of the
other classes (K, H, or G), with some exceptions taken. Therefore any manufacturer
qualified to G, H or K is eligible to produce and mark product as compliant to class
E.